Happy Tuba Tuesday. The Museum today features a R. Wurlitzer, EEb Helicon, 3 Piston, c. 1905.
Serial #: N/A
Bell Diameter: 13.25″
Bore Size: .590″
Height: N/A
Comments: The Rudolph Wurlitzer Co./ Manufacturers/ Cincinnati O/ USA/ PERFECTION
https://simonettitubacollection.com/ins ... on-c-1905/
Tuba Tuesday: R. Wurlitzer, EEb Helicon, 3 Piston, c. 1905
-
bisontuba
- Posts: 1194
- Joined: Thu Aug 13, 2020 8:08 am
- Location: Bottom of Lake Erie
- Has thanked: 248 times
- Been thanked: 1058 times
Tuba Tuesday: R. Wurlitzer, EEb Helicon, 3 Piston, c. 1905
- These users thanked the author bisontuba for the post:
- Mark E. Chachich (Thu May 16, 2024 8:59 am)
-
arpthark
- Posts: 5993
- Joined: Mon Aug 24, 2020 4:25 pm
- Has thanked: 1888 times
- Been thanked: 2034 times
-
bisontuba
- Posts: 1194
- Joined: Thu Aug 13, 2020 8:08 am
- Location: Bottom of Lake Erie
- Has thanked: 248 times
- Been thanked: 1058 times
Re: Tuba Tuesday: R. Wurlitzer, EEb Helicon, 3 Piston, c. 1905
I thought they sure looked similar....
-
humBell
- Posts: 2942
- Joined: Thu Aug 13, 2020 11:25 am
- Has thanked: 367 times
- Been thanked: 307 times
Re: Tuba Tuesday: R. Wurlitzer, EEb Helicon, 3 Piston, c. 1905
I don't think so?
My guess is a European valve set at least?
Mostly just based on the general single sidedness of the valve loops. But an intriguingly abnormal use of the ports, as the leadpipe runs into the bottom front port of the third valve, and the bugle comes out of the bottom front port of the first valve. Now i'm trying to imagine the pistons to make this work, which i suppose is more difficult without knowing the relative heights of the ports.
Cool instrument for sure!
"In this world you have to be oh so clever or oh so pleasant.
For years i was clever, and i recommend pleasant"
-Elwood P Dowd.
For years i was clever, and i recommend pleasant"
-Elwood P Dowd.