Valve racket
Valve racket
I have an Olds O99, 3 banger, sort of new to me. I'm a bone player, so no discernable valve skills. I find the valves can be a little loud. Do I just learn how to not mash the valves, or is there some felt or neoprene or urethane donuts I can put in there so I sound less like I have my own percussion section? Can you point me to a site, vendor, sizes, part number, etc? I'm just a bone player so you gotta make it easy.
-
bloke
- Mid South Music
- Posts: 24353
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5219 times
- Been thanked: 5882 times
Re: Valve racket
- new soft felts of the correct thicknesses
- be certain that the caps and buttons are snugged down
- Often (with instruments this old) valve stem threads are loose and will not snug up. Check those.
- replace the metal valve guides with nylon (SAE 3-48 thread)
>>> Buy these https://www.ebay.com/itm/325556518135 (or cheaper, if you can find them cheaper somewhere else), and cut the heads down to the thin rectangular shape of a valve guide...or have someone else cut them down for you. Of course, you'll cut down the thread length short as well.
ROUGHLY 1/8" thick felts (both under-cap and under button) are CLOSE to correct, but not exactly.
- be certain that the caps and buttons are snugged down
- Often (with instruments this old) valve stem threads are loose and will not snug up. Check those.
- replace the metal valve guides with nylon (SAE 3-48 thread)
>>> Buy these https://www.ebay.com/itm/325556518135 (or cheaper, if you can find them cheaper somewhere else), and cut the heads down to the thin rectangular shape of a valve guide...or have someone else cut them down for you. Of course, you'll cut down the thread length short as well.
ROUGHLY 1/8" thick felts (both under-cap and under button) are CLOSE to correct, but not exactly.
-
Yahnay-san
- Posts: 49
- Joined: Sun Aug 30, 2020 10:52 am
- Has thanked: 24 times
- Been thanked: 10 times
Re: Valve racket
Prices have gone up a bit since I bought something similar off Amazon a while back but still cheaper than the brass round ones, these help quiet noisy valves if they are not too worn overall.