I decided that I don't want to screw around with getting these re-plated to fit my Eb tuba, for those of you who follow that post. I purchased these for an older tuba with slightly out of round valve casings. They fit, but would stick. I'd rather not start another project right now, so I am listing them for sale.
They’ll fit any “big valve” Meinl Weston or B&S tuba.
They are (practically) brand new. They were NOT lapped into my tuba. Next to no mileage on these, as you can see. Pristine.
You will receive just the valves and their protective cases, with the stems attached.
Buyer pays shipping. If you're in the Chicagoland area, you are more than welcome to come look at them. Bring your horn.
My loss is your gain. $1,250. Located in the Chicago suburbs.
PM me with any questions.
[
[
FS: MAW Valves (MW/B&S) - SOLD
Forum rules
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
FS: MAW Valves (MW/B&S) - SOLD
Last edited by Sousaswag on Tue Feb 10, 2026 7:27 pm, edited 4 times in total.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Re: FS: MAW Valves - $1,250
I've read about MAW valves with interest, but there's clearly a lot I don't understand about them (and tubas in general). Don't different tuba makes/models have different entrance/exit angles, spacing, bore diameters, and casing diameters? I would expect MAW valves to need to exist in myriad variations, but your listing suggests they're pretty universal. What am I missing?
Willson 2900 (B♭)
Yamaha YEB-632IIS (EE♭)
Willson 3400S-FA5 (EE♭)
Willson 3060-FA5 (CC)
Yamaha YEB-632IIS (EE♭)
Willson 3400S-FA5 (EE♭)
Willson 3060-FA5 (CC)
Re: FS: MAW Valves - $1,250
Most German made tubas today from Meinl Weston, B&S, Nirschl(?) use the exact same 3/4” valve block.
The same valve block used on a 6450 CC is used on a 2250 F tuba. Kind of silly, but saves them a ton of cost and R&D when they can just paste the valve section on a new body and call it a new tuba.
Hence, MAW valves will fit pretty much any modern tuba made from 2004ish maybe? (whatever year this valve block came out) to present day.
The same valve block used on a 6450 CC is used on a 2250 F tuba. Kind of silly, but saves them a ton of cost and R&D when they can just paste the valve section on a new body and call it a new tuba.
Hence, MAW valves will fit pretty much any modern tuba made from 2004ish maybe? (whatever year this valve block came out) to present day.
Last edited by Sousaswag on Mon Feb 09, 2026 9:17 pm, edited 1 time in total.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Re: FS: MAW Valves - $1,250
Did I mention they’re new? Originally purchased for a 2141 Eb…UncleBeer wrote: Mon Feb 09, 2026 9:05 pm Might be helpful if OP mentions which Eb tuba these were made for. Also...pretty sure Martin's price is $1250. FYI.
His price is about $100 more now. Tariffs. My cost was just under $1,400 when I purchased them a few weeks ago.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Re: FS: MAW Valves (MW/B&S) - SOLD
SOLD. Thx for the interest.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium