These are about 1" OD and .5" ID. Ferree's doesn't seem to stock felts in this size and I am still working on getting my Allied account up and running.
Does anyone have a source for these, or could anyone send me a set of four and I can pay you for them? Not picky on the color.
Kalison/Nirschl(?) top cap felts
-
arpthark
- Posts: 5771
- Joined: Mon Aug 24, 2020 4:25 pm
- Has thanked: 1773 times
- Been thanked: 1912 times
-
bloke
- Mid South Music
- Posts: 24361
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5223 times
- Been thanked: 5886 times
Re: Kalison/Nirschl(?) top cap felts
Those old blue felts are thinner than anything Allied has and wider.
I think you'd be best off buying some sheet felt of the appropriate thickness and a couple of steel circular cutters... the type that chop holes in things like felt and leather. Chinese versions are cheaper, and they might be good enough to do a bunch of these before crapping out on you.
If the sheet felt feels too soft, you can always soak it in water and let it shrink some before you start chopping on it.
I think you'd be best off buying some sheet felt of the appropriate thickness and a couple of steel circular cutters... the type that chop holes in things like felt and leather. Chinese versions are cheaper, and they might be good enough to do a bunch of these before crapping out on you.
If the sheet felt feels too soft, you can always soak it in water and let it shrink some before you start chopping on it.
-
C J
- Posts: 112
- Joined: Fri Oct 09, 2020 4:11 pm
- Location: Drenthe, Netherlands
- Has thanked: 19 times
- Been thanked: 46 times
-
arpthark
- Posts: 5771
- Joined: Mon Aug 24, 2020 4:25 pm
- Has thanked: 1773 times
- Been thanked: 1912 times
Re: Kalison/Nirschl(?) top cap felts
I contacted the Tuba Exchange and they hooked me up. Thanks fellas!
- These users thanked the author arpthark for the post (total 2):
- TheBerlinerTuba (Thu Dec 04, 2025 1:55 pm) • tubatodd (Fri Dec 05, 2025 7:37 am)
Re: Kalison/Nirschl(?) top cap felts
Back in the late 90s, I had a Kalison Daryl Smith. The valves were fantastic. On my horn I had beige rubber bumpers instead of felt. I wonder if those are still available. I'm glad TE was able to get you what you needed.arpthark wrote: Thu Dec 04, 2025 10:20 am I contacted the Tuba Exchange and they hooked me up. Thanks fellas!
Todd Morgan
Besson 995
Rudy Meinl 4/4 CC
Mr. P 5.0
Besson 995
Rudy Meinl 4/4 CC
Mr. P 5.0
-
arpthark
- Posts: 5771
- Joined: Mon Aug 24, 2020 4:25 pm
- Has thanked: 1773 times
- Been thanked: 1912 times
Re: Kalison/Nirschl(?) top cap felts
Yes, I have a DS that I am fixing up to sell. It's a really sweet horn, but it had sat for quite some time and had a ton of crud inside.
Once it's fully flushed out and put back together, it's going to be an awesome tuba.
I actually bought out the rest of TE's stock of Kalison felts, since I have a couple of B&M valvesets that could use them. I am glad they were willing to sell them to me.
Once it's fully flushed out and put back together, it's going to be an awesome tuba.
I actually bought out the rest of TE's stock of Kalison felts, since I have a couple of B&M valvesets that could use them. I am glad they were willing to sell them to me.