Crushed Leadpipe improves horn?
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Crushed Leadpipe improves horn?
Hey all,
Been curious about something for a while now and can't seem to find any solid answers.
I play a Meinl Weston Thor, the older model with the small bell. I also use MAW valves. Earlier this year I noticed that the lead pipe has a small kink in it where it bulges out to the sides. The overall cross sectional area seems to be the same as stock but I can't confirm that. I'm not sure if this happened while I owned the tuba or beforehand.
Anyway, I noticed it after coming back from a decently long playing break of about 3 months and I felt much better than before I took time off. The horn is very responsive and doesn't have any major intonation issues. The kicker is this - is the kink in my leadpipe affecting this or did I just get better? I can't remember how the horn felt before the time off, but I bought it for a reason. Even with the kink, it plays really well - Gene Pokorny even said he liked how it played at a masterclass.
Do any of you have experience with this kind of thing improving the playability of the horn? Did I just get extremely lucky or did I just get better at tuba - ie, would the horn feel even better if I got it unkinked? Curious as to your thoughts.
Been curious about something for a while now and can't seem to find any solid answers.
I play a Meinl Weston Thor, the older model with the small bell. I also use MAW valves. Earlier this year I noticed that the lead pipe has a small kink in it where it bulges out to the sides. The overall cross sectional area seems to be the same as stock but I can't confirm that. I'm not sure if this happened while I owned the tuba or beforehand.
Anyway, I noticed it after coming back from a decently long playing break of about 3 months and I felt much better than before I took time off. The horn is very responsive and doesn't have any major intonation issues. The kicker is this - is the kink in my leadpipe affecting this or did I just get better? I can't remember how the horn felt before the time off, but I bought it for a reason. Even with the kink, it plays really well - Gene Pokorny even said he liked how it played at a masterclass.
Do any of you have experience with this kind of thing improving the playability of the horn? Did I just get extremely lucky or did I just get better at tuba - ie, would the horn feel even better if I got it unkinked? Curious as to your thoughts.
Last edited by Nemo on Thu Sep 11, 2025 8:29 pm, edited 1 time in total.
Re: Crushed Leadpipe improves horn?
Usually I would say no, it probably won’t improve your instrument if it’s out of round or “kinked”
There are some who believe that a dent in the right spot can improve a horn, but I’m not smart enough nor crazy enough to understand or try it out for myself.
You probably just got better or had a good day on the horn.
Me? I’d get it fixed, but honestly if you like it and it doesn’t look weird then you can just leave it.
There are some who believe that a dent in the right spot can improve a horn, but I’m not smart enough nor crazy enough to understand or try it out for myself.
You probably just got better or had a good day on the horn.
Me? I’d get it fixed, but honestly if you like it and it doesn’t look weird then you can just leave it.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Re: Crushed Leadpipe improves horn?
I bought a horn with a dent in the leadpipe. Certain notes were very difficult to play, especially pedal tones.
I got the leadpipe replaced and the problem notes are no longer a problem.
I got the leadpipe replaced and the problem notes are no longer a problem.
OhTubaGuy
Gnagey/Martin Mammoth BBb
Yorkmaster recording bell BBb
King BBb sousaphone
Gnagey/Martin Mammoth BBb
Yorkmaster recording bell BBb
King BBb sousaphone
- bloke
- Mid South Music
- Posts: 24364
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5225 times
- Been thanked: 5887 times
Re: Crushed Leadpipe improves horn?
Silver plating counteracts the effect, and additional weight on the outside of a mouthpiece enhances the effect.
(The Science)
(The Science)
Re: Crushed Leadpipe improves horn?
Thanks for the replies.
I like how the horn plays now and replacing the leadpipe would be out of budget for right now so I'm gonna leave it until I have some cash to spare, but it sounds like it's gotta be done eventually
I like how the horn plays now and replacing the leadpipe would be out of budget for right now so I'm gonna leave it until I have some cash to spare, but it sounds like it's gotta be done eventually
Re: Crushed Leadpipe improves horn?
@Nemo Post a picture of it if you’re so inclined. Usually you don’t need to replace the pipe. A good repair guy can round it out without you spending $XXX+ on a new pipe.
The only reason I’d replace it is if there is a bunch of rot or a big hole.
The only reason I’d replace it is if there is a bunch of rot or a big hole.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Re: Crushed Leadpipe improves horn?
Here's a couple angles. The leadpipe and horn are fine otherwise
- Attachments
-
- 20250910_130823.jpg (155.74 KiB) Viewed 11085 times
-
- 20250910_130816.jpg (149.78 KiB) Viewed 11085 times
Re: Crushed Leadpipe improves horn?
Okay, that sort of thing I’d get fixed. It would drive me nuts were it my tuba.
I think the pipe would probably have to come off to fix that, but no big deal.
Maybe it could be done on the horn, but I don’t know.
I think the pipe would probably have to come off to fix that, but no big deal.
Maybe it could be done on the horn, but I don’t know.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
- windshieldbug
- Posts: 600
- Joined: Thu Aug 13, 2020 1:02 pm
- Location: 8 vb
- Has thanked: 406 times
- Been thanked: 120 times
Re: Crushed Leadpipe improves horn?
Don't fix what ain't broke.
If it’s tourist season, why can’t we shoot them?
-
York-aholic
- Posts: 1827
- Joined: Thu Aug 13, 2020 10:39 pm
- Location: SoCal
- Has thanked: 2371 times
- Been thanked: 686 times
Re: Crushed Leadpipe improves horn?
Break what ain’t fixed!
- These users thanked the author York-aholic for the post (total 3):
- bloke (Thu Sep 11, 2025 7:38 pm) • Mary Ann (Fri Sep 12, 2025 8:13 am) • windshieldbug (Sat Sep 13, 2025 8:39 am)
Some old Yorks, Martins, and perhaps a King rotary valved CC
- bloke
- Mid South Music
- Posts: 24364
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5225 times
- Been thanked: 5887 times
Re: Crushed Leadpipe improves horn?
I previously left a nonsense answer, what I suspect is that it may have fallen with the mouthpiece in it, hit on the mouthpiece on a carpeted floor or something and that resulted in the mouthpipe tubing popping off the bell and folding.
I wouldn't be surprised if there's a depression in the bell where the mouthpiece receiver is located.
Were at mine, I wouldn't leave it like that, but it isn't mine.
I'm also seeing a red rot spot in your picture. I would probably put a dot of no-lead plumbing solder over the outside of that place - super fast so as to try to avoid burning the lacquer (this is after I would restore the mouthpipe to its original roundness and contour).
After that, I would probably search out a place to get a carefully done chemical clean job. I would avoid ultrasonic as personally I would not seek to have the red rot spots be converted to holes.
I wouldn't be surprised if there's a depression in the bell where the mouthpiece receiver is located.
Were at mine, I wouldn't leave it like that, but it isn't mine.
I'm also seeing a red rot spot in your picture. I would probably put a dot of no-lead plumbing solder over the outside of that place - super fast so as to try to avoid burning the lacquer (this is after I would restore the mouthpipe to its original roundness and contour).
After that, I would probably search out a place to get a carefully done chemical clean job. I would avoid ultrasonic as personally I would not seek to have the red rot spots be converted to holes.
- Mary Ann
- Posts: 4166
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 803 times
- Been thanked: 915 times
Re: Crushed Leadpipe improves horn?
You would not know 100% unless you had it fixed, despite how small it is. A friend had a really marvelous 28D horn that she said was apparently getting old because it was harder to play --- and then she had a bell branch dent fixed, and lo and behold the horn played like new again. She had no idea that was the cause. Horn players are big into leadpipes, with quite a few custom ones out there that make a difference in response. Whether your dent is affecting response, you wouldn't know, but I agree that if it were mine I'd get it fixed, but if it isn't bothering you, decide whether you want to spend the money.
